A lawn edger blade is a tool that is used to trim and neaten the edges of a lawn. It can be a handheld tool or one that is attached to a power source, such as a lawn mower. The blade is usually made of metal and has a serrated edge that helps to cut through grass and soil.

I have personally found that using a lawn edger blade can help to make my yard look much neater and more well-kept. I like to use it around the perimeter of my property where the grass meets the sidewalk or driveway. This way, I can create a clean line between the two surfaces and give my yard an overall manicured appearance.

Top Pick

4 Pack Edger Blades

If you’re looking for a reliable and durable set of edger blades, then you’ll want to consider the 4 Pack, Edger Blades Replace Ryobi 613223, Echo 720-237-001, Stihl 4133-713-4101, Maruyama 216062. Green Machine 237001. These blades are made in the USA from high quality materials that are designed to resist rusting and wear. They also have an oil finish that helps to protect them from further damage. The only downside is that they come with unsharpened edges, so you’ll need to take care of that yourself before using them.

BLACK+DECKER Edge Hog Replacement Blade (EB-007)

If you’re looking for a replacement edger blade for your BLACK+DECKER Edge Hog, the EB-007 is a great option. This factory-sharpened and serrated blade is made from hardened steel, so it will make clean cuts every time. The wear indicator on the 7-1/2 inch blade lets you know when it’s time to replace the blade, and it’s compatible with LE750, LE710, and LE760 models.

MTD 781-0748 Replacement Blades (Set of 2)

If you’re in need of a replacement part for the 781-0748, 781-0748-0637, 40-009, 981-0748, or 490-105-M017 models, the HandyTek 9″ 3 Sided Star 5/8″ Center Hole Blade is a great option. This blade is compatible with the Troy Bilt TB554 and TEB515 models and has the following dimensions: center hole – 5/8″, length – 9″, width – 9″.

HandyTek Replacement Edger Blades for Worx WG896 (2 Pack)

If you have a Worx WG895 or WG896 electric lawn edger, then you know how important it is to keep the blade in good condition. A dull or damaged blade can make it difficult to get a clean, precise edge on your lawn. That’s why it’s a good idea to have a spare HandyTek 7-1/2″ Electric Edger Blade on hand. This replacement blade is made of hardened steel and is compatible with the Worx WG895 and WG896 electric lawn edgers. It’s also easy to install – simply remove the old blade and attach the new one in its place. The dimensions of the blade are: thickness – .100 inches, width – 2 inches, length at center – 7 3/8 inches.

Mclane 9×1/2 Hole Edger Blade Replacement (5Pack)

If you are looking for a replacement part for your Mclane or Power Trim edger, the Mclane 9 x 1/2 Hole Edger Blade is the perfect option. Made from U.S. heat-treated spring metal, this blade is 100% original and perfectly balanced. It will not damage the arm on your edger, making it a great choice for those who want to keep their edgers in good condition.

FAQs

How deep should I set my edger?

There is no definitive answer to the question of how deep you should set your edger. The appropriate depth adjustment can range from 0.5” to 3.5” for most machines, and the maximum typical cutting blade diameter for an edger is 9”, which produces a standard edge cut of about 3” when set to the lowest depth.

The best way to determine the appropriate depth for your particular machine and application is to experiment with different settings until you find one that works best for you. Keep in mind that the deeper you set the blade, the more aggressive the cut will be; so if you’re not careful, you could damage your lawn or unintentionally create a trench. Conversely, if you don’t set the blade deep enough, it may not cut through all of the grass and weeds in your path, leaving behind an uneven edge.

As a general rule of thumb, start with a shallower setting and adjust as needed until you achieve desired results.

How often should you change edger blade?

As with any lawn care tool, the key to maintaining a sharp, clean edger blade is to change it regularly. Depending on how often you use your edger, blades will last anywhere from 8-10 months before they need to be replaced.

If you find that your edger isn’t performing as well as it used to or that the blade is becoming dull more quickly than usual, it’s time for a new one. Similarly, if the blade becomes chipped or damaged in any way, it’s also time for a replacement.

Assuming you take good care of your tools and don’t use them excessively, one season should be no problem between changes. However, if you edge frequently then you may need to replace the blade more often – every few months rather than every year.

Which is better string or blade edger?

There are two main types of lawn edgers: string and blade. String edgers use a nylon line that rotates quickly to cut through grass and weeds. Blade edgers have a metal blade that spins to cut through vegetation.

So, which type of edger is better? It really depends on your needs. If you need to create a new boundary in your yard or keep an already defined edge clear, then a string edger is probably the way to go. String edgers can make precise cuts and can reach tight spaces that blade edgers may not be able to get to. However, if you’re looking to maintain an existing boundary or clear areas of weeds and grass that your lawn mower can’t reach, then a blade edger may be the better option. Blade edgers are more powerful than string trimmers and can handle tougher vegetation.

In the end, it really comes down to personal preference and what you need to get done in your yard. If you’re not sure which type of lawn edger is right for you, ask a local gardening expert or home improvement store associate for guidance.

Should a lawn edger be sharp?

A lawn edger should be sharp in order to create a clean, crisp edge along sidewalks, driveways and other hard surfaces. A dull edger will cause the blade to tear grass rather than cut it, resulting in an uneven edge. In addition, a dull edger can be more difficult to push and may require more effort to get the desired results.

Similar Posts